Description

Water Treatment And Purification System

Water Treatment And Purification System, the basic working principle is : using of a special high pressure pump, increasing pressure to raw water, then force raw water penetrating through reverse osmosis membrane under the pressure. Only water molecules and solvent less than microns can pass through the RO membrane.

Water treatment system includes silica and filter, active carbon filter, sodium ion exchanger, Ozone generator and UV Sterilizer, RO machine (If mineral water, use hollow fiber filter). All these machines made by stainless steel food stage.

» RO Plant Machine

• It can removes the hydronium, organic substance, colloid, bacteria and other impurity by the method of membrane. And the water can be desalted and purified. The theory is as follows.
• The treated water and the untreated water are separated by the membrane; and the treated water osmoses to the untreated water. Because there is osmotic pressure between the two. If the pressure is added to the untreated water and the pressure of the untreated water is bigger than the osmotic pressure, the water of the untreated water osmoses to the opposite position of the water. This applies the reverse osmosis to the desalted water.
• That is to say the untreated water is purified into the pure water through the RO membrane under adequate pressure. The left water which can not osmosis through the membrane contains a lot of solute and suspended substance, and it will be drained out as waste water.

» Water Treatment And Purification System Feature

1. Continuous water production without the need of regeneration, reducing labor strength;
2. Ultra-low pressure film imported from USA, with a high desalting rate of 97~98%;
3. Removing 98% of organic matters and bacteria, with a heat source of more than 98;
4. Online electric conductivity monitoring, ensuring good water quality;
5. PLC microcomputer monitoring, flushing the reverse osmosis film at regular intervals.

» You May Need To Know

• The water must be pretreated before entering into the RO system, or it will bring damage to the RO membrane.
• The RO system not only can be used for desalination, but also for filtering the organic substance and bacteria.
• The production of water is monitored by the liquid crystal display conductivity meter.
• The RO system needs be cleaned timely, including the stainless steel pump, filter, disinfectant tank, valve and other components.
• Commonly, the RO system should work once every day. If it does not work in one week, it must be protected by some measures, or the service life of the membrane will be serious affected.